Welding FM Approved Welding Curtains

FM Approved welding curtains have been tested and rated to the ANSI/FM4950 Standard that is now required by the NFPA 51B 2009 Standard. The rating system makes it easy to determine which of the three levels of fire protection - welding curtains, welding blankets or welding pads - is needed for a specific hot work operation. The FM Approvals mark is your assurance that the fabrics conform to the highest internationally accepted standard for quality, safety and performance. All TemproTec FM Approved fabrics are prominently labeled with the proper rating for easy inspection.

Click here for a brief video on the NFPA 51B requirements for FM Approved Hot Work Fabrics.

 

 

TecSil™ 1200C

TecSil™ 1200C features an abrasion resistant coating that provides added durability.

 

Temperature Resistance
Continuous Use:	1800°F
Melt Temperature:	3000°F
Linear Shrinkage:	10% @ 1800°F
Base Fabric:	Plain Weave
Content:	96% Silica (minimum)
Color:	Light Tan
Weight:	12.5 oz/yd2
Thickness:	0.028"
Count:	(w x f) 19 x 14
Size:	38" x 50 yds
Data Sheet (pdf)

---

TecSil™ 1800

TecSil™ 1800 features an abrasion resistant coating that provides added durability.

 

Temperature Resistance
Continuous Use:	1800°F
Melt Temperature:	3000°F
Linear Shrinkage:	10% @ 1800°F
Base Fabric:	Plain Weave
Content:	96% Silica (minimum)
Color:	Light Tan
Weight:	18 oz/yd2 (+/- 10%)
Thickness:	0.03" (+/- 10%)
Count:	(w x f) 30 x 17
Size:	38" x 50 yds
Data Sheet (pdf)

---

TecSil™ 2400

TecSil™ 2400 features an abrasion resistant coating that provides added durability.

 

Temperature Resistance
Continuous Use:	1800°F
Melt Temperature:	3000°F
Linear Shrinkage:	10% @ 1800°F
Base Fabric:	Herringbone Weave
Content:	96% Silica (minimum)
Color:	Light Tan
Weight:	24 oz/yd2 (+/- 10%)
Thickness:	0.04" (+/- 10%)
Count:	(w x f) 30 x 22
Size:	38" x 50 yds
Data Sheet (pdf)

---

TecGlass® GL1300 Black  

 

 

Temperature Resistance:	1000°F
Base Fabric:	4 Harness Satin
Content:	100% Fiberglass
Color:	Black
Weight:	13 oz/yd2
Thickness:	0.018"
Count:	(w x f) 48 x 31
Finish:	Plain or 9383 Heat Cleaned
Specs
USCG Specification:	164.009 - Combustibility
MIL C 20079H Type 1 Class 9 (with 9383 Finish)
Size:	60" x 50 yds
Data Sheet (pdf)

---

TecGlass® GL2025/9383  

TecGlass® GL2025/9383 is safe, tough and versatile. When heat cleaned (9383) the fabric is approved as a welding curtain under ANSI/FM4950.

 

Temperature Resistance:	1000°F
Base Fabric:	Plain Weave
Content:	100% Fiberglass
Color:	Beige
Weight:	18 oz/yd2
Thickness:	0.036"
Count:	(w x f) 19 x 14
Finish:	Plain or 9383 Heat Cleaned
Specs
USCG Specification:	164.009 - Combustibility
MIL C 20079H Type 1 Class 9 (with 9383 Finish)
Size:	60" x 50 yds 40" x 50 yds
Data Sheet (pdf)

---

TecGlass® GL2401

TecGlass® GL2401 is safe, tough and versatile.

 

Temperature Resistance:	1000°F
Base Fabric:	Plain Weave
Content:	100% Fiberglass
Color:	Orange
Weight:	24 oz/yd2
Thickness:	0.055"
Count:	(w x f) 20 x 12
Finish:	Plain or 9383 Heat Cleaned
Break Strength:	(w x f) 200 ppi x 400 ppi
Specs
USCG Specification:	164.009 - Combustibility
MIL C 20079H Type 1 Class 9 (with 9383 Finish)
Size:	60" x 50 yds 40" x 50 yds
Data Sheet (pdf)

---

TecPrene™ 2025GLN

TecPrene™ 2025GLN has a compounded neoprene rubber on one side of the cloth.

 

Temperature Resistance
Basic Fabric:	1000°F
Coating:	225°F
Base Fabric:	Plain Weave
Content:	100% Fiberglass
Color:	Light Yellow
Weight:	18 oz/yd2
Finished Fabric Weight:	21 oz/yd2
Thickness:	0.03"
Count:	(w x f) 19 x 14
Finish:	Compounded Neoprene Rubber on One Side
Size:	60" x 50 yds 40" x 50 yds
Data Sheet (pdf)

---

TecPrene™ 2401GLN

TecPrene™ 2401GLN has a compounded neoprene rubber on one side of the cloth.

 

Temperature Resistance
Basic Fabric:	1000°F
Coating:	225°F
Base Fabric:	Plain Weave
Content:	100% Fiberglass
Color:	Light Yellow
Weight:	24 oz/yd2
Finished Fabric Weight:	26 oz/yd2
Thickness:	0.055"
Count:	(w x f) 20 x 11
Finish:	Compounded Neoprene Rubber on One Side
Size:	72" x 50 yds 60" x 50 yds 40" x 50 yds
Data Sheet (pdf)

---

TecCone® SGL1400      

TecCone® SGL1400 is a silicone coated fiberglass fabric. The silicone coating adds extended life while providing greater oil and water resistance than uncoated fabric.

 

Temperature Resistance
Base Fabric (continuous):	1000°F
Coating (continuous):	500°F
Base Fabric:	Plain Weave
Content:	100% Fiberglass
Coating:	Silicone
Color:	Gray
Weight:	14 oz/yd2 (+/- 10%)
Thickness:	0.013" (+/- 10%)
Count:	(w x f) 28 x 20
Tensile Strength:	(w x f) 175 x 150 lbs/in FTMS 191A/5102
Tear Strength:	(w x f) 35 x 25 lbs/in FTMS 191A/5136
Burst Strength:	175 lbs/in2 FTMS191A/MF122 (Mullen)
Flame Resistance
Char Length:	0.3"
Afterglow:	3 seconds
Flameout:	1 second
Hydrostatic Resistance:	200 lbs/in2 FTMS 191A/M5512 (Mullen)
Size:	60" x 50 yds 38" x 50 yds
Data Sheet (pdf)

---

TecCone® SGL1700

TecCone® SGL1700 is a silicone coated fiberglass fabric. The silicone coating adds extended life while providing greater oil and water resistance than uncoated fabric.

 

Temperature Resistance
Base Fabric (continuous):	1000°F
Coating (continuous):	500°F
Base Fabric:	Satin Weave
Content:	100% Fiberglass
Coating:	Silicone
Color:	Gray
Weight:	17 oz/yd2 (+/- 10%)
Thickness:	0.016" (+/- 10%)
Count:	(w x f) 48 x 31
Tensile Strength:	(w x f) 250 x 200 lbs/in FTMS 191A/5102
Tear Strength:	(w x f) 50 x 25 lbs/in FTMS 191A/5136
Burst Strength:	175 lbs/in2 FTMS191A/MF122 (Mullen)
Flame Resistance
Char Length:	0.3"
Afterglow:	2.5 seconds
Flameout:	1 second
Hydrostatic Resistance:	200 lbs/in2 FTMS 191A/M5512 (Mullen)
Size:	60" x 50 yds
Data Sheet (pdf)

---

TecCone® SGL3200

TecCone® SGL3200 is a silicone coated fiberglass fabric. The silicone coating adds extended life while providing greater oil and water resistance than uncoated fabric.

 

Temperature Resistance
Base Fabric (continuous):	1000°F
Coating (continuous):	500°F
Base Fabric:	Satin Weave
Content:	100% Fiberglass
Coating:	Silicone
Color:	Gray
Weight:	32 oz/yd2 (+/- 10%)
Thickness:	0.035" (+/- 10%)
Count:	(w x f) 47 x 28
Tensile Strength:	(w x f) 500 x 400 lbs/in FTMS 191A/5102
Tear Strength:	(w x f) 75 x 50 lbs/in FTMS 191A/5136
Burst Strength:	400 lbs/in2 FTMS191A/MF122 (Mullen)
Flame Resistance
Char Length:	0.3"
Afterglow:	2.5 seconds
Flameout:	1 second
Hydrostatic Resistance:	200 lbs/in2 FTMS 191A/M5512 (Mullen)
Size:	60" x 50 yds 37" x 50 yds
Data Sheet (pdf)

---

TecWeld® RSH Silicone Cloth

TecWeld® RSH is a fiberglass base fabric that has been coated with a specially formulated silicone rubber compound. It provides great abrasion puncture and tear resistance to the base fiberglass fabric. The silicone coating provides greater life, oil and water repellency than uncoated fabrics. The coating also provides better smoke and flame resistance.

 

Temperature Resistance
Base Fabric (continuous):	1000°F
Coating (continuous):	500°F
Base Fabric:	Satin Weave
Content:	100% Fiberglass
Coating:	Silicone
Color:	Red
Weight:	32 oz/yd2 (+/- 10%)
Thickness:	0.016" (+/- 10%)
Count:	(w x f) 47 x 28
Tensile Strength:	(w x f) 500 x 400 lbs/in FTMS 191A/5102
Tear Strength:	(w x f) 750 x 50 lbs/in FTMS 191A/5136
Burst Strength:	400 lbs/in2 FTMS191A/MF122 (Mullen)
Flame Resistance
Char Length:	0.3"
Afterglow:	2.5 seconds
Flameout:	1 second
Hydrostatic Resistance:	200 lbs/in2 FTMS 191A/M5512 (Mullen)
Size:	60" x 50 yds 37" x 50 yds
Data Sheet (pdf)

---

TecWeld® RSL Silicone Cloth

TecWeld® RSL is a fiberglass base fabric that has been coated with a specially formulated silicone rubber compound. It provides great abrasion puncture and tear resistance to the base fiberglass fabric. The silicone coating provides greater life, oil and water repellency than uncoated fabrics. The coating also provides better smoke and flame resistance.

 

Temperature Resistance
Base Fabric (continuous):	1000°F
Coating (continuous):	500°F
Base Fabric:	Plain Weave
Content:	100% Fiberglass
Coating:	Silicone
Color:	Red
Weight:	14 oz/yd2 (+/- 10%)
Thickness:	0.13" (+/- 10%)
Count:	(w x f) 28 x 20
Tensile Strength:	(w x f) 175 x 150 lbs/in FTMS 191A/5102
Tear Strength:	(w x f) 35 x 25 lbs/in FTMS 191A/5136
Burst Strength:	175 lbs/in2 FTMS191A/MF122 (Mullen)
Flame Resistance
Char Length:	0.3"
Afterglow:	3 seconds
Flameout:	1 second
Hydrostatic Resistance:	200 lbs/in2 FTMS 191A/M5512 (Mullen)
Size:	60" x 50 yds 38" x 50 yds
Data Sheet (pdf)

---

TecWeld® RSM Silicone Cloth

TecWeld® RSM is a fiberglass base fabric that has been coated with a specially formulated silicone rubber compound. It provides great abrasion puncture and tear resistance to the base fiberglass fabric. The silicone coating provides greater life, oil and water repellency than uncoated fabrics. The coating also provides better smoke and flame resistance.

 

Temperature Resistance
Base Fabric (continuous):	1000°F
Coating (continuous):	500°F
Base Fabric:	Satin Weave
Content:	100% Fiberglass
Coating:	Silicone
Color:	Red
Weight:	17 oz/yd2 (+/- 10%)
Thickness:	0.16" (+/- 10%)
Count:	(w x f) 48 x 31
Tensile Strength:	(w x f) 250 x 200 lbs/in FTMS 191A/5102
Tear Strength:	(w x f) 50 x 25 lbs/in FTMS 191A/5136
Burst Strength:	200 lbs/in2 FTMS191A/MF122 (Mullen)
Flame Resistance
Char Length:	0.3"
Afterglow:	2.5 seconds
Flameout:	1 second
Hydrostatic Resistance:	200 lbs/in2 FTMS 191A/M5512 (Mullen)
Size:	60" x 50 yds
Data Sheet (pdf)